liquidscience-seal2-front

Tile Seal and Protect

This sealer is ideal for a Gloss finish that will tranfix itself into the surface of the brick tiles to protect against oil and water based stains.
The after aftect of this seeler will offering an deeper in colour finish to the brick which highlights those beautiful natural colours on and brick tile work.

Suitable Usages



Categories: ,

This sealer is ideal for a Matt finish that will tranfix itself into the surface of the brick slips to protect against oil and water based stains.
The after aftect of this seeler will offering an unchanged matt finish to the brick.

We would recommend using a sealer in areas that the brick slips are likely to be splashed by water, oil or grease and could undergo general cleaning maintennce.

Direction:-

  • 1. Allow the brick surface to dry sufficiently before you apply the seeler treatment.
  • 2. Using a dry lint free cloth or a paint brush, apply an een layer of the LiquidScience Tile & Stone Gloss Sealer. Moving in a circular pattern to ensure complete coverage.
  • 3. Further coats for added protection may be applied. Allow up to 2-3 hours between coats.

Covage: Up to 8-10m2 per litre for one coat, Recommended 2 coats at 5m2 for fully sealed coverage.

Minium application temperature 10deg

Reviews

There are no reviews yet.

Be the first to review “Tile Seal and Protect”

Your email address will not be published. Required fields are marked *